GREEN BUILDING AND RESTORATION

RENEWAL AND DEHUMIDIFICATION

INTOPORE

Eco

INTOPORE is an Eco Biocompatible Plaster, light Dehumidifier, pre-packaged powder for interior and exterior use, according to standard UNI EN 998-1. INTOPORE is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sand, screened with continuous grain size arc from 0 a 5 mm. The only present binder is the St -ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Product features

INTOPORE is a light Dehumidifier, pre-packaged powder, biocompatible, free of salts, chemical products and volatile organic compound (VOCs) plaster. These features, combined with the total mineral nature of the components, guarantee the purity, non-toxicity, non-harmfulness and the total recyclability of the product in full respect for man and the environment. Expanded, low-weight, minerals that makes up INTOPORE has a natural porous structure. This structure gives the material a high capacity of dehumidification and breathability as well as a strong insulating and sound absorbing power. The use of INTOPORE makes the plasters eco-friendly, biocompatible and reversible, giving high breathability to the substrate on which it is applied. In particular, the open porous structure, which characterizes the plaster, gives the material high steam diffusion capacity by regulating the return to the outside of the moisture, thus avoiding the formation of dangerous condensation and bacterial proliferation.

DEHUMIDIFYING
ENVIRONMENT FRIENDLY
CHROMIUM-FREE
RESTORATION
BREATHABLE
RESISTANT
CEMENT FREE
VERSATILE
RECYCLABLE
HEALTHY
ANTIBACTERIAL
ANTI-CONDENSING
ANTI-MOULD
NHL 5
QUICK
LIGHT
REVERSIBLE
EASY

Main features

PRODUCT TYPERestoration and insulation mortar (R-T2) for interior and exterior use complying with the standard UNI EN 998-1
GRAIN SIZE CURVE (EN 1015-1)0 - 5 mm
pH OF THE MIXTURE> 12.5
FRESH MORTAR APPARENT DENSITY (EN 1015-6)915 kg/m3
DRIED MORTAR APPARENT DENSITY (EN 1015-10)600 kg/m3
APPARENT DENSITY IN PILE530 kg/m3
COMPRESSIVE STRENGHT (EN 1015-11)category CS I
FLEXURAL STRENGHT (EN 1015-11)0.34 N/mm2
ADHESION (EN 1015-12)0.10 N/mm2 FP-B
WATER VAPOUR PERMEABILITY COEFFICIENT (EN 1015-19)µ < 6
WATER ABSORPTION THROUGH CAPILLARITY (EN 1015-18)> 0.35 [Kg (m2 min0.5)]
WATER PENETRATION (AFTER THE CAPILLARITY ABSORPTION TEST) (EN 1015-18)< 5 mm
INITIAL SETTING TIME AT 20°C 65% U.R.:18 h
FINAL SETTING TIME AT 20°C 65% U.R.:24 h
THERMAL CONDUCTIVITY (EN 1745:2002 TABLE A 12)T2 0.17 W/(mK)
FLAME RESISTANCE (EN 13501-1)A1 class
MIXING WATER15-17 l per bag
CONSUMPTION6 kg/m2 about for 1 cm thickness
THICKNESS PER COAT2-3 cm
PACKAGING25 kg bag
PALLET48 bags, 1200 kg
STORAGEkeep in dry place for 18-24 months in original package
APPLICATION TEMPERATUREda +5°C a +32°C
REACH CLASSIFICATIONSee SDS

Contact us if you would like to know more about this product?

Fill in the form below and you will be contacted as soon as possible by our expert who will recommend the best solution to your problems

Subscribe to our newsletter

  I declare that I have read and acknowledged the Information drawn up according to Legislative Decree 196/2003 'Code Concerning the Protection of Personal Data' and I give my consent to utilise my personal data in order to make use of the 'Newsletter' service with the methods described in the above-mentioned Information