FINISHES

ADHESIVE SMOOTHING COMPOUND

INTOCIVILE 0.8 BIANCO BOTTICINO

Tonachino

INTOCIVILE 0.8 BIANCO BOTTICINO is a biocompatible smoothing compound for intonachino plaster finish pre-packaged powder for interior and exterior use according to UNI EN 998-1. INTOCIVILE 0.8 BIANCO BOTTICINO is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sand, screened with continuous grain size arc from 0 a 0.8 mm. The only present binder is the St ASTIER Pure Natural Hydraulic Lime NHL 5 according to Standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Product features

INTOCIVILE 0.8 BIANCO BOTTICINO is a biocompatible smoothing compound for intonachino plaster finish pre-packaged powder with free of salts, chemical products and volatile organic compounds VOCs. These features, combined with the total mineral nature of the components, guarantee the purity, non-toxicity, non-harmfulness and the total recyclability of the product in full respect for man and the environment. The use of INTOCIVILE 0.8 BIANCO BOTTICINO makes the smoothing coats eco-friendly and reversible, giving a high breathability to the substrate on which it is applied, avoiding the formation of dangerous condensation and bacterial proliferation by regulating the environmental moisture and carbon dioxide content of the environments.

DEHUMIDIFYING
ENVIRONMENT FRIENDLY
CHROMIUM-FREE
RESTORATION
BREATHABLE
RESISTANT
CEMENT FREE
VERSATILE
RECYCLABLE
HEALTHY
ANTI-CONDENSING
ANTI-MOULD
NHL 5
QUICK
REVERSIBLE
EASY
GREEN BUILDING
POLLUTION RESISTANT

Main features

PRODUCT TYPEMortar for general purposes (GP) for internal and external use complying with the standard UNI EN 998-1
GRAIN SIZE CURVE (EN 1015-1)0 - 0.8 mm
pH OF THE MIXTURE> 12.5
FRESH MORTAR APPARENT DENSITY (EN 1015-6)1600 kg/m3 
DRIED MORTAR APPARENT DENSITY (EN 1015-10)1380 kg/m3 
APPARENT DENSITY IN PILE1200 kg/m3 
COMPRESSIVE STRENGHT (EN 1015-11)category CSI
FLEXURAL STRENGHT (EN 1015-11)1 N/mm2
ADHESION (EN 1015-12)0.4 N/mm2 FP-B
WATER VAPOUR PERMEABILITY COEFFICIENT (EN 1015-19)µ < 15
WATER ABSORPTION THROUGH CAPILLARITY (EN 1015-18)W0
INITIAL SETTING TIME AT 20°C 65% U.R.:12 h
FINAL SETTING TIME AT 20°C 65% U.R.:16 h
THERMAL CONDUCTIVITY (EN 1745:2002 TABLE A 12)0.76 W/mK (tabulated value)
FLAME RESISTANCE (EN 13501-1)A1 class
MIXING WATER6-6.5 l per bag
CONSUMPTION1.4 kg/m2/mm
PACKAGING25 kg bag
PALLET48 bags, 1200 kg
TONALITY NOTE:
STORAGEkeep in dry place for 18-24 months in original package
APPLICATION TEMPERATUREfrom + 5°C to +32°C
REACH CLASSIFICATIONsee SDS

Contact us if you would like to know more about this product?

Fill in the form below and you will be contacted as soon as possible by our expert who will recommend the best solution to your problems

Subscribe to our newsletter

  I declare that I have read and acknowledged the Information drawn up according to Legislative Decree 196/2003 'Code Concerning the Protection of Personal Data' and I give my consent to utilise my personal data in order to make use of the 'Newsletter' service with the methods described in the above-mentioned Information