ADE RAS is a biocompatible, smoothing adhesive compound, pre-packaged powder for interior and exterior use according to standard UNI EN 998-1. ADE RAS is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 0.6 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind. Natural additives give the product excellent applicability,smoothability and adhesion to the substrate.
ADE RAS is a biocompatible adhesive smoothing compound, pre-packaged powder free of salts, chemicals products and volatile organic compounds VOCs. These features, combined with the total mineral nature of the components, guarantee the purity, non-toxicity, non-harmfulness and total recyclability of the product in full respect for man and the environment. The use of ADE RAS allows you to make smoothing coats eco-friendly and reversible, providing high breathability to the substrate on which it is applied, avoiding the formation of dangerous condensation and bacterial proliferation by regulating the ambient humidity and carbon dioxide content of the environments.
PRODUCT TYPE | Mortar for general purposes (GP) for indoor and outdoor use complying with the standard UNI EN 998-1 |
GRAIN SIZE CURVE (EN 1015-1) | 0 - 0.6 mm |
pH OF THE MIXTURE | > 12 |
FRESH MORTAR APPARENT DENSITY (EN 1015-6) | 1600 kg/m3 |
DRIED MORTAR APPARENT DENSITY (EN 1015-10) | 1400 kg/m3 |
1750 kg/m3 | |
ADHESION (EN 1015-12) | |
99% | |
98% | |
60% | |
FRESH MORTAR APPARENT DENSITY (EN 1015-6) | 1530 kg/m3 |
DRIED MORTAR APPARENT DENSITY (EN 1015-10) | 1380 kg/m3 |
APPARENT DENSITY IN PILE | 1240 kg/m3 |
COMPRESSIVE STRENGHT (EN 1015-11) | category CS II |
FLEXURAL STRENGHT (EN 1015-11) | 1.30 N/mm2 |
ADHESION (EN 1015-12) | > 0.6 N/mm2 FP-B |
WATER VAPOUR PERMEABILITY COEFFICIENT (EN 1015-19) | µ < 10 |
WATER ABSORPTION THROUGH CAPILLARITY (EN 1015-18) | W0 |
INITIAL SETTING TIME AT 20°C 65% U.R.: | 12 h |
FINAL SETTING TIME AT 20°C 65% U.R.: | 20 h |
THERMAL CONDUCTIVITY (EN 1745:2002 TABLE A 12) | 0.47 W/(mK) Tabulated |
FLAME RESISTANCE (EN 13501-1) | classe A1 |
MIXING WATER | 6-6.5 l per bag |
COVERAGE | 1,4 Kg/m2 per thickness of approximately 1 mm |
THICKNESS PER COAT | 1-3 cm for bonding approx. 1-1.5 cm for reinforced smoothing |
PACKAGING | 25 kg bag |
PALLET | 56 bags, 1400 kg |
STORAGE | Keep in dry place for 18-24 months in original package |
APPLICATION TEMPERATURE | da +5°C a +32°C |
REACH CLASSIFICATION | See SDS |
Fill in the form below and you will be contacted as soon as possible by our expert who will recommend the best solution to your problems