FINISHES

LIME

Tonachino rasante biocompatibile preconfezionato

PASTELLONE is a compact satin-effect, smoothing compound for intonachino plaster finish, biocompatible, pre-packaged powder for internal and external use according to the standard UNI EN 998-1. PASTELLONE is totally free of concrete and compounds belonging to the clinker group. It is made up of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 0.4 mm. The only binder is the ST -ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking silica limestones at temperatures below 1250° C and reduced to powder by only the breakdown of the calcium oxide without the addition of pozzolanic or hydraulic binders of any kind.

Pittura minerale biocompatibile

STORICAL AFFRESCO is a biocompatible mineral paint consists of only Lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900° C, long cured, totally hydrated and classified with the CL 90-S PL marking according to standard UNI EN 459-1. It is used naturally or mass-coloured with light resistant inorganic pigments for painting, glazing or whitewashing.

Puro grassello di calce costituito da idrossido di calcio

STORICAL CL90 is pure lime putty made exclusively of calcium hydroxide Ca (OH) 2> 98% totally hydrated. STORICAL CL90 obtained by baking pure limestones in vertical ovens at temperatures below 900°C, long cured, at least 24 months, totally hydrated and classified with the CL 90-S PL mark according to UNI EN 459-1. STORICAL CL90 is free of any impurities such as lime crumbs or lime lumps.

Tonachino minerale biocompatibile

STORICAL MARMO LUSTRO is a biocompatible mineral intonaco plaster finish, a ready to use paste. It consists of impalpable marble and lime putty powders obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. The product is available in white or mass-coloured with light resistant inorganic pigments to perform high quality smoothing coats with special chromatic effects, glossiness and compactness.

Tonachino minerale biocompatibile

STORICAL MARMO OPACO is a biocompatible mineral Intonachino plaster finish, a ready to use paste. It consists of impalpable marble powders, chromatically selected aggregates and lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. The product is mass-coloured with light resistant inorganic pigments to perform high quality smoothing coats with special chromatic effects and compactness.

Tonachino minerale biocompatibile

STORICAL TONACHINO 0.35 is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 0.35 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 0.35 can be used in white natural colour or mass-coloured with light resistant inorganic pigments for the execution of fine plaster or spot-faced coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO 0.75 is a mineral biocompatible Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 0.75 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 0.75, can be used in natural white or mass-coloured with light resistant with inorganic pigments for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO 1.1 is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 1.1 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 1.1 can be used in natural white colour or mass-coloured with light resistant inorganic pigments for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO NATURALE is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of chromatically selected and screened sands with a continuous grain size arc from 0 to 0.75 mm and, as the sole binder, lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90- S PL mark according to UNI EN 459-1. It is mass-coloured with inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO SABBIETTA TICINO TICINO is a biocompatible mineral intonachino plaster finish, a ready to use paste. It consists of a mixture of chromatically selected and screened sands with a continuous grain size arc from 0 to 0.75 mm and, as the sole binder, lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90- S PL mark according to UNI EN 459-1. It is mass-coloured with inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Subscribe to our newsletter

  I declare that I have read and acknowledged the Information drawn up according to Legislative Decree 196/2003 'Code Concerning the Protection of Personal Data' and I give my consent to utilise my personal data in order to make use of the 'Newsletter' service with the methods described in the above-mentioned Information